隨著釀酒設備的不斷創新，小型釀酒設備的智能化的發展給我們的釀造操作帶來了方便。只需要一個或兩個人操作一臺設備。
With the continuous innovation of brewing equipment, the intelligent development of small-scale brewing equipment has brought convenience to our brewing operation. Only one or two people are required to operate a device.
這種裝置可以有效地節省勞動力資源。但是更近很多客戶反映在使用釀酒設備的過程中會出現漏水的情況，所以我們要求釀酒設備廠家介紹一下小酒釀造設備漏水的處理方法。
This device can effectively save labor resources. But recently, many customers have reported that there will be water leakage in the process of using the brewing equipment, so we asked the brewing equipment manufacturers to introduce the treatment method of water leakage in the small wine brewing equipment.
，如果在溫度方向上的小型白酒設備低于-13.2攝氏度，錫焊不足以修復它，錫在那個低溫下會發生金屬點陣變成粉狀灰渣錫，使焊點泄漏。當溫度上升時，水又會漏。
First of all, if the temperature of the small white spirit equipment is lower than - 13.2 ℃, tin welding is not enough to repair it. At that low temperature, the metal lattice will turn into powdery slag tin, making the solder joints leak. When the temperature rises, the water will leak again.
第二,如果很薄的小酒釀造設備只能使用防水膠修復,厚鉆孔,攻螺絲,不銹鋼螺絲,大裂縫或拆遷,錫鋅鋁合金焊接鋁不銹鋼儲罐的60% 5% 35%的錫、鋅和鋁釋放鐵勺融化等加熱電器,細長桿。清洗裂紋處的油污，用砂布打磨氧化膜，然后用螺絲刀或鋼鋸片刮擦干凈。用噴燈將鋁件加熱300-400℃，在裂紋處摩擦焊條。當焊條熔化時，用螺絲刀將熔化的焊條合金在裂紋處進行摩擦，使合金流入裂紋內，再逐漸加厚焊接層。
Second, if very thin small wine brewing equipment can only be repaired with waterproof glue, thick drilling, tapping screws, stainless steel screws, large cracks or demolition, 60% 5% of the tin, zinc and aluminum alloy welded aluminum stainless steel storage tanks, 35% of the tin, zinc and aluminum release ladle melting and other heating appliances, slender rods. Clean the oil stain at the crack, polish the oxide film with abrasive cloth, and then scrape it with a screwdriver or hacksaw blade. Heat the aluminum parts to 300-400 ℃ with a blowtorch and rub the welding rod at the crack. When the electrode melts, use a screwdriver to rub the melted electrode alloy at the crack, make the alloy flow into the crack, and then gradually thicken the welding layer.
維修是指對生產設備進行定期或不定期的維修檢查，以保證小型白酒設備生產廠家的正常運行。目的是保證生產設備不發生或少發生故障。各職能部門應掌握保養和維修的指導方針。維修的時刻由使用和管理自己靈活把握，可以計劃和控制，是主動和主動預防維修的手段。
Maintenance refers to regular or irregular maintenance and inspection of production equipment to ensure the normal operation of small-scale liquor equipment manufacturers. The purpose is to ensure that the production equipment does not have or less failures. Each functional department shall master the maintenance and repair guidelines. The maintenance time is flexibly controlled by the user and the manager, which can be planned and controlled. It is an active and active means of preventive maintenance.
如果要處理小型白酒釀造設備的泄漏問題，就要注意很多細節。今后我們將繼續收集相關信息，并向大家詳細介紹。我們希望在此期間的內容能對我們有所幫助。
If we want to deal with the leakage of small-scale liquor brewing equipment, we should pay attention to many details. In the future, we will continue to collect relevant information and introduce it to you in detail. We hope that the content in this period can help us.
The above is a detailed introduction of the automatic stubble cooler to the treatment of water leakage in the brewing equipment. I hope it can help you. For more information, please click http://sanfu-flour.com/
自動售酒機 2024-07-25 
